SPECIAL MACHINES
Threading Machine
Threading by removable of material from both ends (internal thread at one end & external thread at another end) by planetary rotating carbide saw.
Threading:
- Trapezoidal Thread (as per IS – 12818)
- Square Thread
Standard Features:
- Simple in operation (layman can operate)
- Robust and sturdy design
- Universal clamping of pipe
- Ac Servo & PLC operated
- Fast threading compare to conventional threading machine
- No setting is required for different pipe diameter
- No change of saw for internal and external thread
| Description | HTM – 280 |
|---|---|
| Pipe Internal (Max/Min) | 300/120mm |
| Pipe External (Max/Min) | 280/113 mm |
| Pipe Thickness (Max/Min) | 14 / 05 mm |
| Pipe Length Minimum | 250 mm |
| Connected Power | 5.25 kW |
| Air required/operation (@ 6 BAR) | 3.5Ltr |
| Space required
Height(mm) Width(mm) Length(mm) |
2000mm 1800 mm 2000 mm |
| Center Height of Pipe Entry | 1000 mm |
Coupler Cutting
Coupler pipe cutting with adjustable cut length and adjustable diameter by carbide tipped saw with plunger type cutting operation.
Standard Features:
- Cutting with safety guard
- Carbide tipped cutter for longer life
- Smooth and clean cut
- Movement through pneumatics cylinder for smooth operation
- Clamping force adjustable, depending upon wall thickness & diameter of pipe
- Simple in operation
- Inbuilt coupler counter
| Description | HCCU-110 | HCCU-200 | HCCU-315 |
|---|---|---|---|
| Pipe range (mm) | 16 -110 | 50-200 | 110-315 |
| Saw Drive Motor Power | 1.5 | 2.25 | 3.75 |
| Saw(mm) | 350 | 460 | 850 |
| Adjustment of pipe | 75 – 1250 | 75 – 1250 | 125 – 1250 |
Offline Chamfering Machine
Pipe chamfering unit chamfering on pipe as per IS 4985.
| DESCRIPTION | HFCM-200 |
|---|---|
| PIPE Ø RANGE (mm) | 75 – 200 |
| TOOL DRIVE MOTOR POWER (kW) | 1.5 |
| PIPE CLAMPING | MANUALLY |
| SPACE REQUIRED
Height (mm) Width (mm) Length(mm) |
1400 700 2000 |
| MOTOR | ABB / EQUIVALENT |
Planetary Offline Chamfering
- Carbide tipped chamfering cutter for longer life
- Smooth and clean cut
- Pipe gripping force adjustable, depending upon wall thickness & diameter of pipe
- Bottom and Bottom pipe gripping on rubber roller and gripping is adjustable according to pipe diameter
- PLC operated
- Chamfering cutter RPM can be adjustable through AC drive
| DESCRIPTION | HPCM – 400 |
|---|---|
| PIPE Ø RANGE (mm) | 110 – 400 |
| CHAMFRING CUTTTER DRIVE MOTOR POWER (kW) | 3.75 |
| CUTTER RPM | 2800 |
| PIPE CENTRE HEIGHT(mm) | 1000 |
| SPACE REQUIRED (Approx.)
LENGTH (mm) WIDTH (mm) HEIGHT (mm) |
2500 1000 1800 |
| AIR REQUIRED PER OPERATION IN LTR. | 8 |
| CONNECTED POWER IN kW | 3.75 |