We are Providing Extruders for PVC and for HEPE.
|HX 45-SPEED||HX 60-SPEED||HX 75-SPEED|
|Max Output *||Kg/hr||275-325||450-500||750-800|
|Drives||Main Drives(Kw/ AC)||90||132||250|
The output depends on the formulation, die, temperature, etc.
PVC being heat-sensitive material requires to control friction heat. Hasmukh’s Parallel Twin Screw Extruder with a higher L/D ratio ensures optimum fusion and gentle mixing higher torque capacity coupled with optimum screw design permits wider processing window.
|Main Motor Power||kW||30||45||75|
|Total Connected Load||kW||45||85||127|
Hasmukh’s conical twin-screw extruder is compact design saves valuable production area. The angular position of the screw axes makes space for a rugged distribution gearbox and a substantial backpressure bearing. The relatively small screw diameter results in minimal thrust forces in the metering zone, which contributes to the long service life of the thrust bearing. The screw especially designs for PVC processing ensures extremely gentle plasticizing.
|Drives||Main Drive (kW-AC)||37.5|
|General Data||Total Connected Load Approx (kW)||70|
|Center Height (mm)||1150|