HEW Extruder is offering for extrusion of polyol thin (HDPE, PP, PPR) pipes.
Extruder with special geometry of screw and grooved feed results into higher output, homogenous plasticizing, and Less slippage of the material.
CONTAINER PIPE EXTRUSION
CONTAINER PIPE EXTRUSION
Extruder
Features:
The Hasmukh’s Speed extruder is energy efficient for
- processing PE material
- L/D ratio of 37: 1 for better melt homogeneity
- Direct-coupled design reduces transmission loss
- Wear-resistant coating improve screw life at high rpm
- Grooved feed design
| HX 45-SPEED | HX 60-SPEED | HX 75-SPEED | ||
|---|---|---|---|---|
| Max Output * | Kg/hr | 275-325 | 450-500 | 750-800 |
| Screw | Decimeter | 45 | 60 | 75 |
| L/D Ratio | 37 | 37 | 37 | |
| Drives | Main Drives(Kw/ AC) | 90 | 132 | 250 |
Output is depends on formulation, die, temperature etc.
- Specifications are indicative & as a part of our continuous development, we reserve the right to change specifications.
- without prior notice.
- For customized application the specification can be altered.
Die Head
Die head Specification:
- Multiple heating zones for pure melting
- Uniform Material Flow
- Wall thickness can be adjustable
- Internal Air; vacuum and water colling
Spray Cooling Tank
Features:
- Tank with Stainless Steel construction
- Mechanical seal spray pump(s) with high head and high flow rate
- Manual longitudinal adjustment on rail
- Height and side manual adjustment
- Appropriate working platform with aluminum chequered plate
- Easily cleanable spray nozzles
- Tank with Stainless Steel construction
- Mechanical seal spray pump(s) with high head and high flow rate
- Manual longitudinal adjustment on rail
- Height and side manual adjustment
- Appropriate working platform with aluminum chequered plate
- Easily cleanable spray nozzles
Optional Features:
- Double Chamber Tank
- Motorized longitudinal adjustment on rail
- Pipe support with central height adjustment
- 9-meter length
Multi track Pipe haul Off
Multi track pipe haul-off has been specially developed to pull at constant speed & synchronized with extrusion speed.
Features:
- Multi Belt Haul-Off 3/4/6/8 belts for optimum pulling force and to prevent ovality even for large diameter and thin wall pipe
- Pneumatic clamping of pipe ensure ease in setup and efficient pulling of pipe
- Ac variables Frequency, drive with AC geared motor
- Easily removable rubber pads/molded rubber chain
- Synchronization with any type of extruders
- Wide range of line speed is available and required speed is selected very easily through AC frequency drive
Optional Features:
- Special shaped rubber pads
- Individual track drive and individual Ac geared motors with AC drives / AC servo motor with drive
- Thickening Unit(by showing off all the haul-off units)
- Motorized positioning of lower tracks
Planetary Pipe Cutting Unit
Pipe cutting & chamfering with planetary motion.
Features:
- Carbide tipped cutter for longer life
- Movement through pneumatics cylinder for smooth operation
- Clamping force adjustable, depending upon wall thickness & diameter of pipe
- Saw table movement through pneumatic cylinder can be synchronized with pipe line speed
- Inbuilt pipe cutting counter
- PLC operated
- No cable movement
Optional Features:
- Saw table movement through Ac servo motor & drive
